AOC EN5200-ei Bedienungsanleitung PDF herunterladen (Seite 29)

EN5200-ei

Page 29 of 42

B、Adjust C1(6500) color-temperature

1、Switch the chroma-7120 to RGB-Mode (with press “MODE” button )

2、Switch the MEM .channel to Channel 4( with up or down arrow on chroma 7120 )

3、The LCD-indicator on chroma 7120 will show x = 313 ±10, y = 329 ±10,

Y = 180 ±10 cd/m

4、Adjust the RED of color3 on factory window until chroma 7120 indicator reached

the value R=100

5、Adjust the GREEN of color3 on factory, until chroma 7120 indicator reached G=100

6、Adjust the BLUE of color3 on factory, until chroma 7120 indicator reached B=100

7、Repeat above procedure ( item 5,6,7) until chroma 7120 RGB value meet the

tolerance =100±2

Press reset key

Turn the POWER-button off to on to quit from factory mode.

10. EDID CONTENT

x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF

00 00 FF FF FF FF FF FF 00 16 09 63 E5 0B 60 01 00

16: 12 0D 01 03 68 1E 17 82 2A 71 F5 9F 55 4B 99 24

32: 1C 4F 54 BF EE 00 01 01 01 01 01 01 01 01 01 01

48: 01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88

64: 36 00 30 E4 10 00 00 18 00 00 00 FF 00 31 32 33

80: 34 35 36 37 38 39 30 31 32 33 00 00 00 FD 00 37

96: 4B 1E 3F 08 00 0A 20 20 20 20 20 20 00 00 00 FC

112 00 45 4E 2D 35 32 30 30 65 69 0A 20 20 20 00 78

Note: Byte 0C, 0D, 0E, 0F means Serial No. Byte 10, 11 mean Manufacture Time. Byte

7F means checksum

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Keine Kommentare

AOC EN5200-ei Bedienungsanleitung Seite 29